[Introduction] : A medium and fine crushing equipment. The spring is the insurance device that can also influence crushing force.
[Capacity] : 12～1000t/h
[Improvement] : The mining crusher incorporate the accumulator into the fixed cone hydraulic locking system. The operation is more stable. The moving cone is supported suspension by the spherical bearing. A water seal dustproof device is applied to maintain a long-lasting seal.
Continuous rotation of the operated cone body and high productivity;
Easy to press, impact and crush and low power consumption;
Even particle size of products and uniformly surface wear of movable cone;
Simple structure: frame, horizontal axis, movable cone, balance wheel, eccentric bushing, upper crushing wall (fixed cone), down crushing wall (movable cone), fluid coupling, lubrication system, hydraulic system, control system, etc;
The movable cone swings close to discharge opening of crushing cavity, which intersects an equal parallel strip between them to make end products granularity. The feed opening is not large, which can deal with the primary crushed materials;
This kind of cone crusher adopts dry oil and water sealing avoiding dust entering and keeping clean.
The working principle of the spring cone crusher is driven by a motor, and the linkage of gears makes the driveshaft and transmission gear drive the eccentric sleeve to rotate. The moving cone of the spring cone crusher makes a rotary motion under the action of the eccentric sleeve. The moving cone and fixed cone close or dissociate with each other, thus continuously impacting and crushing the material.
The structure of spring cone crusher is mainly composed of frame, fixed cone, moving cone assembly, spring mechanism, bowl shaft frame and transmission.
|Type||Model||Diameter of Crushing Cone (mm)||Inlet Dimension (mm)||Max. Feed Size (mm)||Adjustment Range of Outlet (mm)||Motor Power|
|PYB-900/135||900||135||110||15 ~50||55||50 ~90|
|Short Head||PYD-600/40||600||40||35||3~13||30||12 ~23|