[Introduction] : Classifying equipment is used for classifying solid particles by means of different sedimentation speed in slurry.
[Capacity] : 10～1785 t/d
[Improvement] : An automatic elevating apparatus is added to the discharge opening. The scoop of the ball mill makes the equipment run more smoothly.
A sand return automotive lifting device is added on the sand return end, and the configuration of big spoon bit is canceled for ball mill.
1-1.5 degrees of electricity can generally be saved per ton of ore.
Frequent maintenance of big spoon bit is avoided.
Uneven impact on large and small gear is retarded.
High spiral classifier operation: the grinded pulp is fed into a tank from the inlet in the middle of settlement region, and the slurry classification sedimentation area is under the inclined tank. The spiral with low-speed rotation stirs the slurry, so that the fine particles rise, and the coarse particles sink to the bottom of the tank. The overflow dam is above the bearing center which is under screw shaft, and is underneath overflow end.
| Type | Model | Rotating Speed of Spiral (r/min) | Capacity of Sand Return (t/d) | Capacity of Overflow (t/d) | Spiral Diameter (mm) | Spiral Length (mm) | Slope of Water Tank | Drive Motor Model | Drive Motor Power (kW) | Lifting Motor Model | Lifting Motor Power (kW) | Weight (kg) |
| Single Spiral Classifier | FLG-300 | 7.7 | 30 ~80 | 10-30 | Φ300 | 3900 | 14 ~18 | Y100L1-4 | 2.2 | Manualdriven | — | 668 |
| FLG-500 | 8 | 145~260 | 21-32 | Φ500 | 4390 | Y112M-6 | 1600 | |||||
| FLG-750 | 7.8 | 256~654 | 31-65 | Φ750 | 5500 | Y132S-6 | 3 | 2716 | ||||
| FLG-1000 | 6.7 | 473~1026 | 85 | Φ1000 | 6556 | Y132M2-6 | 5.5 | 4000 | ||||
| FLG-1200 | 5,6,7 | 1145~1600 | 150 | Φ1200 | 6500 | Y132M2-6 | 5.5 | Y90L-4 | 1.5 | 7943 | ||
| FLG-1500 | 2.5,4,6 | 1140~2740 | 235 | Φ1500 | 8265 | Y160M-6 | 7.5 | Y100L1-4 | 2.2 | 11827 | ||
| FLG-2000 | 3.6,5.5 | 3890~5940 | 400 | Φ2000 | 8700 | Y160L-6/4 | 11; 15 | Y100L2-4 | 3 | 20814 | ||
| FLG-2400 | 3.6 | 6800 | 580 | Φ2400 | 9130 | Y200L2-6 | 22 | Y112M-4 | 4 | 24194 | ||
| FLG-3000 | 3.2 | 11625 | 890 | Φ3000 | 12500 | Y200L-4 | 30 | Y112M-4 | 4 | 42188 | ||
| Double Spirals Classifier | 2FLG-1200 | 5,6,7 | 2340~3200 | 310 | Φ1200 | 6500 | Y132M2-6 | 5.5X2 | Y90L1-4 | 1.5X2 | 15840 | |
| 2FLG-1500 | 2.5,4,6 | 2280~5480 | 470 | Φ1500 | 8230 | Y160M-6 | 7.5X2 | Y100L1-4 | 2.2X2 | 22903 | ||
| 2FLG-2000 | 3.6,5.5 | 7780~11880 | 800 | Φ2000 | 8400 | Y160L-4 | 15X2 | Y100L2-4 | 3.0X2 | 34621 | ||
| 2FLG-2400 | 3.63 | 13600 | 1160 | Φ2400 | 9130 | Y200L2-6 | 22X2 | Y112M-4 | 4X2 | 42460 | ||
| 2FLG-3000 | 3.2 | 23300 | 1785 | Φ3000 | 12500 | Y200L-4 | 30X2 | Y112M-4 | 4.0X2 | 73030 |
