products
[Introduction]: A jigging machine realizes the separation of light and heavy mineral by the different sedimentation speed in vertical alternating water flow
[Capacity]: 1～25t/h
[Improvement]: The cone slide valve is adopted; the failure rate is reduced by 80%; low energy consumption;the separation of different material, improvement of the processing capacity by more than 35%.
Diaphragm Jig is divided into two kinds of models including left-hand machine and right-hand jig cover. With the fixed sieve, the jig is suitable for metal ore classification such as placer contained tungsten and gold, tin concentration ore. This jig can be used not only for classification of fine-grained materials but also for that of raw materials with the largest size of 6-8 mm, but in the individual case of placer classification, the largest size is up to 12 mm.
| Item & Parameters & Model | Jigging Chamber | Diaphragm | Feed Size (mm) | Adding Water Yield Under Screen (m3/t) | Water Pressure (MPa) | Handling Capacity (t/h) | Motor Power (kW) | Dimension (mm) | Weight (kg) | ||
| Shape | Area (m2) | Stroke (mm) | Jig Frequency (time/min) | ||||||||
| JT-0.57 | Trapezoid | 0.57 | 8.5 ~12 10 ~17 12 ~21 | 80~180 | <6 | 1~2 | ≥ 0.05 | 1.5 ~3 | 1.5 | 1550X780X1530 | 610 |
| JT1-1 | Trapezoid | 1.04 | <10 | 2~3 | 2.5 ~5 | 2.2 | 2270X1110X1890 | 900 | |||
| JT2-2 | Rectangle | 2.28 | <10 | 2~4 | 5~10 | 3 | 3225X1550X2050 | 1640 | |||
| JT3-1 | Trapezoid | 3 | 12 ~30 | 50~125 | <10 | 3~6 | ≥ 0.05 | 7.5 ~15 | 5.5 | 2745X2000X3030 | 3085 |
| JT4-2 | Rectangle | 4 | 25 ~57 | <25 | 4~8 | 8~20 | 7.5 | 4240X1990X2750 | 3098 | ||
| JT4-2A | Rectangle | 4 | 25 ~57 | <25 | 4~8 | 8~20 | 4X2 | 4240X1990X2750 | 3500 | ||
| JT5-2 | Trapezoid | 4.86 | 12 ~30 | <10 | 3~6 | 12 ~25 | 7.5 | 3600X2000X2600 | 4500 | ||
To find out more about our products and solutions, please fill out the form below and one of our experts will get back to you shortly.
CHAT
MESSAGE
.jpg "Ball mill")
