Common Placer Gold Separation Equipment

Common Placer Gold Separation Equipment

2016-01-18 XinHai Views (1155)

If you want to know more information, like quotation, products, solutions, etc., please contact us online.

Thanks to the weathering, raw gold ore exposed in the air can be crushed gradually into gold particles and cuttings. With the help of external force, minerals with heavier particles are enriched in hillside, bed, and lake shore. Once those settings have mining valve, they become placer gold. Placer gold separation working is classified into preparing work and separation work. Now, common placer gold separation equipment is briefly introduced.

Placer gold has coarser spare particles and good dissociation. Usually, a high coarse concentrate is achieved by crushing, desliming, and then gold gravity separation. Minerals whose particles are more than 100mm exist in mined placer gold. Before gold separation, those coarse minerals should be crushed, and in case gold included in them are lost to tailings. Meanwhile, a part of gold is adopted in rock with coarse particle sizes. During the crushing process, this part of gold should be separated down to improve gold recovery rate. There are rare fine minerals containing gold. It is difficult in recovery. However, slurry of those fine minerals has heavy influence on later gravity separation, and fine slurry should be removed in preparing work. Placer gold separation equipment used in preparing work is cylindrical screen and flat screen. Crushing and desliming are achieved by vibration of water and screen shaft. In gold separation work, commonly used equipment is shaking table, jig, spiral chute, and spiral concentrator. Minerals are separated and enriched according to differences of particle sizes, shapes, and weight. There are three methods of processing coarser minerals achieved by gravity separation. First one is gold is washed out by pans, and then, heavy sand is abandoned. The second one is HG is mixed by amalgamation barrel to achieve amalgam, and then, heavy sand is abandoned. And last one is when gold is achieved by washing or mixing GH, heavy sand is sent to refining plant. Methods of magnetic separation and electrical separation are used to recovery kinds of heavy sand minerals.

Xinhai has a gold separation research team with the most experience in domestic. At the same time, Xinhai focuses on products optimization and improvement.

Related Products

Related news