[Introduction] : A submerged slurry pump with high wear resistance.
[Capacity] : Flow≤105m³/h
[Improvement] : Impeller is moulded by wear-resistant rubber developed by Xinhai; wear index reaches 128%.
The design is based on the liquid-solid two-phase flow theory, and the head can reach 118m;
Reasonable design of internal structure avoids the interference of the pulp impact and blockage; It can be applied in a variety of working conditions;
Alloy wear-resistant material is used for the impeller with large diameter and low speed;
Changeable elastic body or clad lining;
It is easy to replace wet parts.
The main components of submerged slurry pump includes the impeller, shaft, protective board, pump shell, packing box etc..
| Specification | Flow(m3/h) | Head(m) | Rotation Speed(r/min) | Motor Maximum Power(Kw) | Maximum Efficiency(%) | Impeller Diameter(mm) | Outlet Diameter(mm) |
| 40PV-SPR/XH | 17.239-39.6 | 4-26.0 | 1000-2200 | 15 | 40 | 188 | 40 |
| 60QV-SPR/XH | 25.5-105 | 5.5-30.5 | 700-1500 | 30 | 51 | 280 | 65 |
| 100RV-SPR/XH | 64.8-285 | 7.5-36 | 600-1200 | 75 | 62 | 370 | 100 |
