[Introduction] : One valve control two pipes.
[Capacity] : ≤0.7MPa
[Improvement] : It adopts a spherical valve design, relying on the flow of the slurry to drive the sphere to one of the pipeline outlets and close it.
Xinhai wear-resistant rubber as the liners of Y–ball valve with 128% wear resistance index;
Service life is 2-4 times longer than traditional valve.
The ball wrapped by Xinhai wear-resistant rubber which can effectively open and close the two valve ports in Y-ball valve.
Slurry flow driving ball into a pipe orifice and close it; slurry pass by another pipe orifice. So it will not cause blockage.
The Y-ball valve relying on the pressure of slurry to change the valve does not need people to control realizing automatic control, simple and flexible.
Adopting Y-ball valve realizes pipeline setting of two pumps with one valve.
The Y-Ball Valve uses the slurry pressure to complete the opening and closing work between the two valve ports, and close them through mutual coordination.
Outstanding ball valve design of opening and closing, no blocking; creative opening and closing device control the valve by slurry pushing the ball. Y- Ball valve realizes pipeline setting of two pumps with one valve to reduce the investment cost by only buying one valve and saving one pipeline.
| Nominal Pressure (MPa) | 0.7 | |||
| Diameter Range (mm) | DN65-500 | |||
| Test Pressure | Seal | 1.0 | Test Medium | Water |
| Intensity | 1.5 | Water | ||
| Working Pressure (MPa) | ≤ 1.0 | |||
| Working Medium | Slurry, Slag, Tailings, etc. | |||
